
Greetings, this is Rishabh Kumar ( Aerospace Engineering, Amrita Vishwa Vidyapeetham)

The simulation folder is named "Liquid-Gas Bubble contactor"
In that you can find 3 sub folders named with U=0.2, u=0.4, u=0.6,

in FOLDER - U=0.2, the inlet velocity of air injected is 0.2 m/s
in FOLDER - U=0.4, the inlet velocity of air injected is 0.4 m/s
in FOLDER - U=0.6, the inlet velocity of air injected is 0.6 m/s

The mesh is the same in all different simulations

The computational load is not heavy but the simulation takes a lot of time because the step time is less (10^-4 s) and end time is 10 s.

Also you can find,
the plots for the simulation in the PLOTS folder
Gas-Liquid Bubble Column Contactor - K Rishabh Kumar - report for this simulation.
Bubble_Column_Contactor_Abstract - abstract submitted for this simulation or the case.


Thank you!!